FERROUS

• *Appliances (doors removed, no CFC’s)
• Electronics
• Cable, fence and wire
• Cast Iron
• Construction Equipment (cut up)
• Demolition Scrap
• Farm Machinery (cut up)
• Industrial Scrap Steel
• Machine Shop Turnings & Cast Iron Borings
• Railroad Scrap
• Sheet Metal
• Structural beams
• Tanks larger than 100 gal. much have 3 ft. hole

IN GENERAL:

#1 Prepared Steel:
¼” & over thickness, individual pieces not over 48”x18”

#1 Unprepared Steel:
¼” & over thickness, no dimensional limit

Light Iron/#2 Steel
Anything under ¼” thickness, no dimensional limit

NON-FERROUS

• Alternators
• All grades of aluminum:
  Aluminum Cans
  Aluminum Extrusions
  Cast Aluminum
  Painted Siding
  Sheet Aluminum
• AL/CU Radiators
• *Batteries (lead acid, not cracked)
• Brass Plumbing, Fixtures, Faucets & Fittings
• Catalytic Converters
• Copper #1 &#2
• Insulated Aluminum Wire
• Insulated Copper Wire
• Electric Motors
• Heater Cores
• Scrap Lead
• Starters
• Radiators
• Stainless Steel

Above Ground & Underground Storage Tanks
Must be drained with a 6” hole, no liquids
or sludge, and no combustible vapors

Aerosol Cans
Must be empty

Appliances
Must have doors removed
Must have fluid filled capacitors removed
Must have CFCs removed
Containers with free flowing liquids

Barrels, drums, pails and buckets
Must be triple rinsed, dried and lid removed

Batteries
Lead acid, no damage or cracks
Only accepted at non-ferrous scale

Closed Top Drums
No liquids, top removed or drum crushed

Compressed Gas Cylinders
Must be devalued and cut in half

Gas Tanks
Must have visible 8”x8” hole and be dry

Open Top Drums
Must be free of liquids or sludge

Tanks
Larger than 100 gal. must have 3 ft. hole

Transformers
Must be drained and have a letter verifying no PCBs

Turnings, Borings, Motor Blocks & Oily Scrap
Only accepted when unloaded directly into designated area